1、PLC 電PLC帶程序
控制要求:用PLC基本邏輯指令編程,控制紅、綠、黃彩燈循環。
1.按鈕控制起動,并有急停功能。
2.按規定組別進行循環點亮:① ② ③ ④ ⑤(循環次數及點亮時間由考評員現場,組別見試卷)
一、輸入端、輸出端的分
配接線圖:15分 1.能正確畫出分配圖得15分;
2.未注明輸入端、輸出端符號得5分。
二、編制梯形圖:20分 1.編制正確
2、三菱 FX 三菱-FX-1HC 用戶指南
on〉 〉 〉 〉 〉
l Use crimp terminals of the dimensions specified in the left figure.
l Secure the terminals using a tightening torque of 0.5 to 0.8 N•m (5
to
3、三菱 三菱-IB(NA)-0800437E
3.1 Handling Precautions
(1) Do not drop or give a strong impact to the case.
(2) Do not remove the printed-circuit board of the module from the
case.
Doing so may cause a failure.
(3)
10、三菱 Robot 三菱-Robot arm setup RV-12SD12SDL
All teaching work must be carried out by an operator who has received special trainin
(This also applies to maintenance work with the power source turned ON.)
Enforcement of safety training
Fo